Model HD-6000 NSA & DoD Approved Degausser (Remanufactured)

NSA & DoD Approved Hard Drive Degausser

The Model HD-6000 Degausser meets all DoD specifications for declassifying information on hard disk media with coercivities up to 3800 oersteds and magnetic tape media with coercivities up to 2500 Oe. The degaussing chamber accommodates all disk drives up to 3.5 inches (89 mm) high by 6 inches (152 mm) wide by 10 inches (245 mm) deep. The effective degaussing field is 6 inches (152 mm) square by 3.5 inches (89 mm) high.

The machine meets HIPAA and GLB Act requirements for device and media controls policies and procedures that govern the receipt and removal of hardware and electronic media, including disposal, media, reuse, and accountability.

This unit is available as a remanufactured unit only.

Features:

• Simple Operation
• NSA Approved
• Listed on Degausser Approved Products List
• Chamber-Type Degausser
• Pulse Discharge Magnetic Field
• One-Pass Operation
• Continuous Duty
• One Minute Cycle Time
• Media Size: chamber accommodates hard disk drives to 3.5 in (89 mm) high by 6 in (152 mm) wide by 10 in (245 mm) deep, and tape media form factors to 1 in (25.4 mm) high by 4.3 in (109 mm) wide by 7.3 in (186 mm) deep. Effective degaussing field is 4 in (102 mm) deep for disk drives to 4.6 in (117 mm) deep for tape media.
• Power: 120 or 230 V, 50/60 Hz

Media Erased:

• Hard Disk Drive
• Zip Drive
• Jazz Drive
• Floppy Disks
• TK50, TK70
• 3480, 3490E
• SLR1, SLR2, TR-1, DC2120, DC6150, DC6525
• SLR3, SLR4, SLR 5, TR-3, DC9100, DC9120, SLR24, SLR32,
  TR-4
• ADR30 , ADR50, ADR2-120
• TR-5, SLR40, SLR50, SLR60, SLR100
• TR-7 (Travan 40 GB), SLR75, SLR140
• DLT Tape III, DLT Tape IIIXT
• DLT Tape IV, DLT Tape VS1
• Super DLT Tape I
• Super DLT Tape II
• D8: 8mm 112m, 8mm 160m
• DDS1: 4mm 60m, 4mm 90m
• DDS2 4mm 120m
• DDS3 4mm 125m
• DDS4 4mm 150m, DAT-72 4mm 170m
• DTF-1
• DTF-2
• Redwood SD-3
• Magstar MP: 3570-B, 3570-C, 3570-C/XL
• Magstar: 3590, 3590-E
• Enterprise 3592
• STK-9840, STK-T9940
• LTO-Ultrium1
• LTO-Ultrium2
• LTO-Ultrium3
• Mammoth 8mm, AIT-1 8mm, VXA-1 8mm
• AIT-2 8mm, AIT-3 8mm
• S-AIT-1 ½", AIT-4 8mm
• M2 Mammoth2 8mm, VXA-2 8mm 230m

Please note that shipping in the contiguous United States will be an additional charge of $795.00. As international shipping and non-contiguous domestic shipping rates vary, we will provide a quote for your location upon receipt of your order.